Metrologic Instruments 46-00885 Manuel d'utilisateur télécharger pdf

Optional Wall/Tabletop Stand (PN 46-00885)

To fix mount the stand to the wall:

1. Drill two #39 pilot holes in the wall spaced 39 mm (1.54") apart on a

horizontal centerline.

2. Install one #8 wood screw in each of the pilot holes, leaving a space

between the head of the screw and the wall surface.

3. Locate the two slots marked as "A" on the stand base in Figure 5.

4. Match the "A" slots on the stand to the heads of the installed wood

screws.

5. Slide the stand over the screw heads and down to lock the stand in place.

Figure 5. Figure 6.

Cradle Angle Warning

MS9590

TAND

NSTALLATION

UIDE

Flex Stand Components (PN 46-00709)

Item Item Description Qty.

A Cradle Coupler 1

B Cradle 1

C Flexible Shaft 1

D Screw Cap 2

E Stand Base 1

F ¼" - 20 x ⅜" Flat Head Phillips Screw, 100° Undercut 2

G #8 Round Head Wood Screw (for fixed mount applications) 2

H M3 -.5 x 20 mm, Pan Head Phillips Screw 1

J M3 Flat Washer 1

K M3 Split Lock Washer 1

L Flexible Shaft Cover 1

Figure 1. Stand Components

November 2007

Printed in the USA

00 - 05249B

- 4 - - 1 -

1 2

Optional Wall/Tabletop Stand (PN 46-00885) To fix mount the stand to the wall: 1. Drill two #39 pilot holes in the wall spaced 39 mm (1.54") a

Figure 3. Flex Stand Assembly (PN 46-00709) Figure 2. Stand Assembly Optional Flex Stand Fixed Mount (PN 46-00709) 1. In the kit, two #8 wood scr

Pas de commentaire

Metrologic Instruments 46-00885 Manuel d'utilisateur